Lapierre Sensium and Dreamliner Mission for Sale

Kevin Knorr is cleaning his garage. This means bargain opportunities for the rest of us. He is selling his Lapierre Sensium road bike and his Dreamliner Mission. Kevin describes each bike in detail below.

Contact: Email is k-nor@earthlink.net

Lapierre Sensium – I’m selling my Lapierre Sensium WS build. I love the bike but never ride it and need to move it from my garage. MSRP is a touch over $6,000. I would like to get $3,000 for it (essentially the price of the frame).

I built the bike in September of 2012 and have ridden it 60 miles on the road and approximately two hours on my trainer.

I am a UBI and DT Swiss Certified mechanic and wheelbuilder. I’m also extremely particular about the look, performance and reliability of my bikes. This bike is completely dialed and nearly brand new.

Frame: 2012 Lapierre Sensium WSeries 55cm (MSRP of $3000) The frame weighs only 957g.
Fork: 2012 Lapierre carbon fork (including the steerer tube)
Headset: Ritchey Carbon sealed cartridge headset
Stem: Ritchey  WCS 4Axis 90mm
Handlebar: Ritchey WCS Curve 46cm
Bar Tape: LizardSkin DSP 1.8mm
Brake/Shifters: Sram Rival 10spd
Front derailleur: Shimano Ultegra
Rear derailleur: Sram Rival
Derailleur cable housing: Alligator mini I-links
Derailleur cables: Red titanium-nitride coated
Brake cable housing: Alligator I-links
Brake cables: Red titanium-nitride coated
Brakes: Sram Rival
Brake pads: Koolstop Dura2 carbon
Crank: Sram Red Compact 34/50t 175mm
Chain: KMC X10SL
Cassette: Sram Red 11-26t
Seat: WTB Silverado Nicad rails
Seatpost: Thomson Elite 27.2
Seatclamp: Carbon
Tires: Maxxis Detonator 25c
Tubes: Kenda 48mm presta
Rims: Lightbike Carbon
Spokes: Sapim CX-Ray bladed spokes
Nipples: DT Swiss 12mm alloy
Hubs: Chris King R45
Bottle cage: Lezyne

Lapierre

Dreamliner/Mission 4x Slopestyle/ DJ Build – I built this bike with the intention of riding a lot more big jump lines at places like Duthie Hill, Post Canyon, and Black Rock. Unfortunately, I spend more time on my trail bike or my BMX bike so it’s time to sell this one.

I am a UBI and DT Swiss Certified mechanic and wheelbuilder. I’m also extremely particular about the look, performance, and reliability of my bikes. This bike is completely dialed and nearly brand new. Most of the components are nearly new, some brand new. The frame has only been ridden about six times.

MSRP is hovering around $5,500. The frame sells for $2,250. I’m asking for $2,650 for the complete bike.

Frame: 2013 Diamondback Mission 4x/Dreamliner, Large 23″ top tube. Extremely limited production frame.
Fork: RockShox Lyric SoloAir (lowered to 100mm) with Mission Control Damper
Headset: FSA Sealed
Compression assembly: RockShox Turncoat
Stem: Spank Tweet Tweet (Brand new, installed but never ridden)
Handlebars: Spank Tweet Tweet (Brand new, installed but never ridden)
Grips: Spank Tug Job
Seat: Alienation Pivotal (Brand new, installed but never ridden)
Seatpost: Alienation 30.9mm Pivotal (Brand new, installed but never ridden)
Seatclamp: 11g alloy with titanium bolt
Pedals: Spank Spike (brand new, installed but never ridden)
Cranks: E13 LG1 DH cranks 165mm
Chainring: RaceFace 34t
Chainguide: E13 LG1
Chain: KMC X9SL titanium nitride coated
Cassette: Sram PG990 modified to run as a 7speed 11-27t
Shifter: Sram X0
Derailleur: Sram X0 short cage
Hubs: Chris King ISO (Complete rebuild done when the wheels were laced to the new rims)
Spokes: DT Swiss Champion stainless spokes (Brand new, laced up but never ridden)
Nipples: DT Swiss Brass 12mm (Brand new, laced up but never ridden)
Rims: Spank Tweet Tweet(Brand new, laced up but never ridden)
Tires: Maxxis Larsen TT 2.35 front/2.1 rear

Dreamliner

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*